Assessment Validation: Tips and Insights on How to Validate Assessments

Assessment Validation: Tips and Insights on How to Validate Assessments

Blog Article

Registration brings RTOs many duties like annual declarations, AVETMISS reporting, and marketing compliance, yet validation often proves to be the most feared.

Although we've written about validation many times, let’s redefine it. ASQA refers to validation as a quality review of the assessment process.

In essence, validation confirms which parts of an RTO's assessment process are correct and pinpoints elements for improvement. With a solid grasp of its key components, validation becomes manageable.

According to SRTOs 2015 Clause 1.8, RTOs must ensure that their assessment systems, including RPL, comply with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.

The standards necessitate conducting two types of validation.

The first validation type ensures your RTO's assessments comply with the training package requirements in your scope.

The subsequent validation type ensures assessments are in line with the principles of assessment and rules of evidence.

Thus, validation is performed both prior to and following the assessment. The first type, assessment tool validation, is the focus here.

What are the Two Types of Assessment Validation?

A Deep Dive into Assessment Validation

As we mentioned earlier and in our past blogs, validation consists of two parts: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation, also referred to as assessment tool validation, is related to the first part of the clause, ensuring all unit requirements are addressed and workbooks are entirely compliant.

In contrast, post-assessment validation focuses on the implementation, requiring Registered Training Organisations to conduct assessments according to the Principles of Assessment and Rules of Evidence.

In this article, we will emphasize assessment tool validation.

Procedure for Assessment Tool Validation

After reviewing the two types of validation, let’s explore the specifics of assessment tool validation.

When to Conduct Assessment Tool Validation

The goal of assessment tool validation is to make sure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

Thus, whenever new learning resources are purchased, you must conduct assessment tool validation before allowing student use.

You don’t need to wait until your next 5-year validation schedule. Immediately validate new resources to ensure they’re ready for student use.

Still, this isn't the sole reason for conducting this type of validation. Conduct assessment tool validation when you:

- updating your resources
- new training products are added to your scope
- when course is reviewed against training product updates
- your risk assessment includes identifying your learning resources as a risk

ASQA's risk-based regulation approach means RTOs should perform regular risk assessments. If students complain about learning resources, it's a perfect time for assessment tool validation.

Which Training Products Should You Validate?

Bear in mind, this validation is meant to ensure all learning resources are compliant before use. All RTOs are required to validate all unit resources.

Getting Started with Assessment Tool Validation: Resources Needed

Course Materials

Since you are validating your assessment tools, you will require the entire suite of your learning resources:

Mapping tool – this is the initial document to review. It identifies which assessment items address unit requirements, speeding up validation.

Learner/student workbook – assess its appropriateness for use as an assessment tool. Verify clear instructions and adequate answer fields. This is often a gap.

Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are included. Clear benchmarks are key to reliable assessment outcomes.

Other related resources – such as checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are suitable for the assessment task and address unit requirements.

Panel for Validation

Clause 1.11 outlines the requirements for validation panel members, indicating validation can be done by one or more individuals. Typically, RTOs require all trainers and assessors to attend, occasionally inviting industry experts.

Collectively, your validation panel should have:

Relevant vocational competencies and industry skills applicable to the unit being validated

Up-to-date expertise and skills in vocational teaching and learning

Any of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or an updated successor

Assessment validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool aids both the validation process and documentation. It simplifies seeing how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It serves as documentation that you have validated your resources prior to student use.

Although ASQA does not recommend or require a particular template for assessment tool validation, many templates are accessible online. These tools typically have validators examine the tools in their entirety to determine if they meet the principles of assessment.

Assessment Principles Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While these templates facilitate the validation process, they can result in judgment errors due to the limited space for comments on each assessment item.

A more detailed template is recommended to thoroughly inspect each unit requirement and the assessment items that align with them. Below is an example:

Element Performance Criteria Instructions for Assessment Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What to Check?

As outlined in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.

Core Principles of Assessment
Fairness – Does the assessment ensure equal opportunity and access for everyone?

Flexibility – Does the assessment offer multiple ways to show competence according to different needs and preferences?

Validity – Does the assessment measure what it is supposed to measure? Is it a valid tool for evaluating the required skill or knowledge?

Reliability – Will the assessment give consistent results every time, no matter who conducts the training? Will different assessors consistently decide on skill competence?

Essential Rules of Evidence

Validity – Is the evidence confirming that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to ensure the learner has the required skills and knowledge?

Authenticity – Does the assessment tool confirm that the work is the candidate’s own?

Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?

Although these are often addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.

To prevent using learning resources that fail to address some unit requirements, ensure you follow these guidelines:

Follow Through with Actions

Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Complete each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

diaper changing

bottle preparation, feeding babies from bottles, and cleaning equipment

prepare solid foods and feed infants

respond properly to baby signs and cues

prepare and settle infants for sleep

monitor and support age-appropriate physical exploration and gross motor skills

Having students describe the process of changing nappies for babies under 12 months doesn’t meet the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Be Cautious with Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby won’t suffice.

All Requirements or Not Competent

Observe the lists. As noted above, if students website are asked to perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Could You Be Clearer?

Each assessment item must include clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Hence, ensure your instructions are clear and not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What information can be included in a work package?

Possible answers could include:

Necessary materials

Relevant costs

Time required for activities

Appointed duties and responsibilities

When an assessment item requires multiple answers, specify how many answers a student must provide. This way, your assessment remains reliable, and the evidence collected is valid.

The same applies to assessment items with double-barrelled questions or questions that ask for more than one answer simultaneously. These can confuse both students and assessors, as illustrated in the example below:

Identify a hazard and/or environmental concern in the work area and select the most effective hazard control hierarchy.

Answers could include, but are not limited to:

Weather conditions – isolating the work area, engineering controls, personal protective equipment

Work area and ground conditions – elimination, isolation, use of engineering controls

People – isolation, engineering, administration

Structural hazards – substituting, isolation, engineering controls

Chemical hazards – isolation, engineering controls, administrative controls

Equipment or machinery – isolation, engineering controls, administrative controls

Steering clear of double-barrelled questions makes it simpler for students to respond and for assessors to judge competence accurately.

Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.